Court Conversions
Turn an underused tennis court into one to four regulation pickleball courts, with permanent lines and the right net height.
What Goes Wrong
The gap between a playable court and a frustrating one usually comes down to three decisions made too quickly.
Painting permanent lines over a cracked or deteriorating acrylic surface shortens line life and leaves the play surface uneven.
The builder inspects the surface before scoping any line work, so patching or recoating is itemised separately if needed.
Court tape lifts in Phoenix heat and portable nets shift during play, creating inconsistent line positions and wrong net height.
Permanent acrylic striping and a net post setup configured to 34 inches at center replace temporary gear entirely.
Shared-use courts with no color separation between tennis and pickleball lines cause confusion and slow down play for both sports.
Shared-use layouts use distinct colors for each sport’s markings so players can read their court at a glance.
Fitting pickleball courts into a tennis footprint without measuring run-off clearance leaves courts too cramped to play safely.
The builder maps the full footprint and run-off clearance before any paint is applied, confirming how many courts fit.
Scope of Work
From a single shared-use layout to a full four-court pickleball facility, the scope is defined by the existing footprint and how the space will be used.
Pickleball lines are added alongside existing tennis markings using color separation so both sports remain readable on the same surface.
Tennis lines are replaced entirely with one to four pickleball courts at 20 by 44 feet each, fitted to the available footprint.
The builder checks for cracks, drainage issues, and acrylic wear before striping, then scopes spot patching or a full recoat as needed.
Existing tennis net posts are adjusted or a permanent pickleball net system is installed to reach the regulation 34 inches at center.
Regulation NVZ lines painted at 7 feet from the net.
Full court perimeter lines for each pickleball court.
Surface recoat applied before permanent line striping.
Net tensioned and centered to pickleball specification.
Why Choose Us
We connect customers with vetted local builders who know Phoenix surfaces and scope conversions in writing before any work starts.
A local builder assesses the court in person so the written estimate reflects the actual surface condition and footprint.
Surface work, line striping, and net setup are listed as separate line items, no bundled quotes that hide what you are paying for.
The builder factors in UV exposure and Phoenix’s dry climate when assessing surface condition and specifying coating materials.
We arrange builders for single residential courts and multi-court HOA facilities across the Phoenix metro area.
Line accuracy and net height are checked and confirmed with the customer before the job is considered complete.
The Process
01
Tell us the site address and how you plan to use the court, and we’ll arrange a local builder to contact you.
02
The builder inspects the surface, measures the footprint, and delivers an itemised written estimate covering all scoped work.
03
The builder completes the striping and net setup, then walks through the finished court with you to confirm every specification.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Single-court conversion | $3,500-$7,000 |
| Two-court conversion | $7,000-$14,000 |
| Four-court conversion | $14,000-$28,000 |
We’ll arrange a local builder to evaluate the surface, measure the footprint, and put the full conversion scope in writing before any work is scheduled.