Skip to content

Rink Construction

Hockey & Roller Hockey Courts in Phoenix

A regulation rink with smooth acrylic surfacing, dasher boards, and drainage built for monsoon season.

  • On-Site Evaluation
  • Itemised Estimate
  • Final Walkthrough
  • Phoenix Metro Coverage
Resurfaced tennis court with fresh acrylic coating and restored line markings community center

Built Right vs. Built Fast

Where cheaper rink builds fail, and what the right approach looks like

Surface Variation

Any dip or ridge greater than three-sixteenths of an inch over ten feet kills puck and wheel speed.

Flatness Check First

The slab is measured and corrected to that tolerance before the acrylic finish coat is applied.

Surface-Mounted Boards

Boards bolted to the surface rather than embedded sleeves rock under board checks and loosen over time.

Embedded Sleeve Anchors

Dasher boards and goal posts anchor to sleeves cast into the slab perimeter, staying rigid under play.

Poor Monsoon Drainage

A flat or improperly graded slab pools water after summer storms, leaving the rink unplayable for hours.

Graded Slab Drainage

Drainage slope is engineered into the slab so water clears the playing surface within minutes of a storm.

Unmarked or Wrong Lines

Incorrect face-off circles or crease dimensions mean the rink does not meet USA Hockey inline standards.

Regulation Line Marking

Face-off circles, blue lines, center line, and goal crease are marked to USA Hockey inline dimensions.

Boards, Surface & Lines

Roller hockey courts need a smooth, fast surface that drains after monsoon rain

Standing water and surface texture inconsistencies are the two most common complaints on poorly built rinks.

Request a Site Assessment

Roller hockey demands a smoother surface than basketball, puck and wheel speed depend on it. The builder applies a fine-texture acrylic coating over a flat, sealed concrete slab. Any surface variation greater than three-sixteenths of an inch over ten feet is corrected before the finish coat goes down.

Monsoon drainage is graded into the slab so water clears the playing surface within minutes of a storm. Dasher boards are anchored to embedded sleeves in the slab perimeter, not surface-mounted, so they stay rigid under board checks. Goal posts anchor to the same embedded system.

Regulation face-off circles, blue lines, center line, and goal crease are line-marked to USA Hockey inline dimensions. The written estimate covers slab, coating, dasher board system, hardware, and line marking as separate line items. A final walkthrough confirms board alignment, surface smoothness, and drainage before sign-off.

Why Choose Us

Why choose us for your roller hockey rink in Phoenix?

From the first site visit to the final walkthrough, every step is documented and confirmed in writing.

Written Estimate Before Any Work Starts

Slab, coating, dasher boards, hardware, and line marking are each listed as separate line items.

Ground Evaluated Before Pricing

The site assessment covers soil conditions and Arizona sun exposure before the estimate is written.

Backyard to HOA Scale

Work covers backyard rinks, HOA and school facilities, and resurfacing for worn or damaged courts.

Phoenix Metro Area Coverage

Construction enquiries are handled across the full Phoenix metro region, not just the city center.

Confirmed Sign-Off at Completion

A final walkthrough checks board alignment, surface flatness, and drainage before the job is closed.

A modern dark grey house with a large backyard featuring a swimming pool, a patio with outdoor furniture, and a blue and orange basketball court.
A modern residential backyard featuring a bright green artificial putting green with a checkered flag, bordered by a dark grey building and a neatly trimmed hedge under a vibrant sunset sky.

The Process

From first enquiry to skating on your finished rink

Request a Site Assessment

  1. 01

    Submit Your Site Details

    Tell us the location and intended use, and we’ll schedule a site visit.

  2. 02

    Receive a Written Estimate

    The site assessment covers soil, drainage, and sun exposure, then provides a fully itemized written estimate.

  3. 03

    Build & Final Sign-Off

    Construction runs from slab prep through line marking, ending with a walkthrough before you sign off.

Pricing Estimates

Typical Hockey & Roller Hockey Courts Prices

JobTypical cost
Backyard roller hockey court$18,000-$40,000
Mid-size roller hockey court$35,000-$75,000
Full court with boards$60,000-$140,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about building a roller hockey rink in Phoenix

  • Can an existing driveway or slab work as the base?

    Only if it is flat, crack-free, and drains correctly. The builder checks the slab condition before specifying any surface. Cracks, slope issues, or rough spots affect skating quality and safety, so the slab may need repair or resurfacing before tiles are laid.

  • What happens if I delay building and keep using the rough surface?

    An uneven or cracked surface wears skate wheels faster, creates trip hazards, and makes puck movement unpredictable. The longer a damaged slab is used for skating, the more the surface deteriorates, which can increase the base prep cost when you do build.

  • What is a roller hockey court actually made of?

    Most outdoor courts use modular sport court tiles over a concrete slab. The tiles are rated for inline skate loads and have drainage gaps between panels. An acrylic color coating over bare concrete is an alternative, but tiles are more common for Phoenix conditions given UV and heat.

  • Is a roller hockey court the same as a general skating rink?

    Not exactly. A roller hockey court is laid out for hockey play, with boundaries, face-off markings, and perimeter containment sized for the sport. A general skating surface may lack the layout, board containment, and surface flatness tolerance that hockey play requires.

  • What needs to be checked before the build starts?

    The site assessment measures the site, checks slab flatness and drainage, and accounts for UV exposure and Phoenix heat in the tile spec. The property type also matters: a backyard court, school facility, and commercial complex each have different layout and material requirements.

More questions about Hockey & Roller Hockey Courts?

Tell Us Your Site & Sport

We’ll schedule an assessment of the ground and sun exposure, then put the full scope in writing.

Request a Site Assessment