Wood Gym Floors
A flat, stable wood floor built from the subfloor up, ready for heavy use and years of service.
What Goes Wrong
The failure modes that shorten a wood gym floor’s life are almost always set up before the first board goes down.
Installing over an untested subfloor in Phoenix’s dry climate can still trap residual moisture, causing boards to cup or separate within months.
The builder runs moisture readings first and selects the moisture barrier weight that matches the actual conditions found on that slab.
High and low spots left uncorrected telegraph through the finished surface, creating uneven bounce and accelerating wear in specific zones.
Flatness is checked and corrected before any wood system goes down, so the finished surface plays consistently across the full area.
Softer species chosen to cut costs dent under repeated impact, lose surface consistency quickly, and require refinishing far sooner than hard maple.
Hard maple’s density and tight grain are specified for heavy-use gyms; engineered options are assessed where subfloor conditions make them a better fit.
Cutting cure intervals between finish coats leaves a wear layer that scratches early, dulls unevenly, and bonds poorly to the wood beneath it.
Each finish coat is allowed the correct cure interval before the next pass, producing a wear layer that bonds fully and holds up under sustained use.
Scope of Work
From subfloor prep to painted game lines, every component of the wood floor system is handled as part of the job.
The builder checks flatness and corrects high or low spots before the wood system is laid, preventing surface irregularities in the finished floor.
Moisture readings are taken from the slab, and the appropriate barrier is specified and installed to reduce warping and long-term movement risk.
Hard maple, birch, and engineered wood options are assessed against the space’s use pattern and subfloor conditions before the estimate is written.
The floor is sanded flat after acclimation, then finished in multiple coats with the correct cure interval between each pass for a durable wear layer.
Sport layouts are painted into the finish at the end of the job, covering the specific line configurations the space requires.
Full wood floor system built from slab to finish coat.
Old floor removed and replaced with a new wood system.
Surface restored where wear is the primary issue.
Wood floor specified for mixed-sport or recreation use.
Why Choose Us
Every job is handled by a local builder who knows Phoenix conditions, and every estimate is written after a site visit, not before.
No estimate is written until a builder has inspected the space in person, so the scope reflects actual site conditions.
Subfloor prep, wood supply, finishing, and game lines appear as separate line items, no bundled totals that hide what you are paying for.
Local builders are arranged across the full Phoenix metro area, including school gyms and multi-use recreation centers.
The service covers new gymnasium floors and full replacements, so the right scope is scoped from the start rather than discovered mid-job.
Surface flatness, finish adhesion, and line accuracy are checked at a final walkthrough before the job is signed off and handed over.
The Process
01
Tell us the site location and how the space will be used, and we will arrange a local builder to contact you.
02
The builder visits the site, inspects the subfloor, runs moisture tests, and assesses the space before writing any estimate.
03
The full wood floor system is installed, finished, and line-marked, then checked at a final walkthrough before handover.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Small gym floor repair | $5,000-$12,000 |
| Full hardwood gym floor installation | $40,000-$120,000 |
We’ll arrange a local builder to assess your site, specify the right wood system, and put the full scope in writing before any work begins.