Volleyball Court Installation Questions

Sand is the most common choice because it cushions landings and drains well over a properly graded gravel base. Hard-surface options are available where sand is impractical, but the builder will walk through the player-safety trade-offs for each option during the site assessment.

Caliche, a dense calcium carbonate layer common in Phoenix-area soil, blocks drainage and resists compaction. The builder excavates past it before setting the gravel base. Skipping that step leads to a surface that shifts, holds water, and becomes uneven within a season.

Uneven, ungraded ground without a defined boundary or clearance zone increases the risk of ankle injuries from divots and hard landings. A properly graded and edged court removes those hazards and stays consistent through Phoenix’s monsoon season.

The on-site evaluation measures available ground and maps clearance zones around the boundary lines. The builder will tell you whether the space supports a full layout or whether a modified footprint makes more sense for safe play.

A basic setup is possible, but site grading, caliche excavation, and drainage slope are harder to get right without the right equipment. A court built without proper base prep and drainage typically becomes uneven or waterlogged within one or two monsoon seasons.

Yes. Net post anchors are set into the base layer before surface fill is placed, and the net is tensioned to regulation height after the posts are secured. The final walkthrough confirms net height along with surface level and boundary alignment.